MSOP to DIP Programming Adapters
MSOP device interface to DIP plug for programming systems
Technical Overview
MSOP to DIP adapters provide a socketed MSOP device interface on the adapter top side and a
standard 0.100″ pitch DIP plug footprint for programming and development systems.
This family is directional by definition: MSOP → DIP. MSOP pitch and body size are device-dependent
and must be confirmed prior to selection.
Electrical routing is defined per SKU and may be 1:1 or device-specific, depending on the target
device and programming requirements.
Mechanical Configuration
- Top interface: MSOP (Mini Small Outline Package), gull-wing leads
- MSOP pitch: 0.50 mm or 0.65 mm (SKU dependent)
- Bottom interface: 0.100″ (2.54 mm) pitch DIP plug footprint
- DIP span: 0.300″ (300 mil) or 0.600″ (600 mil), SKU dependent
- Socket vs pad: Device interface is socketed unless otherwise specified on the SKU
Routing Configurations
Routing is defined at the product level and is disclosed on each individual SKU page.
The sub-hub does not target routing variations.
-
1:1 Mapping: Direct pin-to-pin continuity between the MSOP device pins
and the corresponding DIP plug pins. -
Device-Specific Mapping: Signal reassignment to match manufacturer
pinouts or programmer requirements. -
Skips or Shorts: Implemented only when required by device architecture
or programming interface constraints.
Confirm routing requirements before selection to prevent incompatibility with
target programming systems.
Products
The following MSOP to DIP programming adapters are currently listed in this family.
| Order | P/N | Top Pins (PLCC) | Bottom Pins (DIP) | Socket Type | Short Technical Description |
|---|---|---|---|---|---|
| 1 | PA8SO6-OT | 8 | 8 | Open Top | MSOP Programming adapter for 8-pin MSOP, 3.30 mm body, 0.65mm lead-pitch, wired 1-1. 600 mil span DIP plug. |
| 2 | PA10MSO-OT-6 | 20 | 20 | Open Top | MSOP Programming adapter for 10-pin MSOP, 3.00 mm body, 0.50mm lead-pitch, wired 1-1. 600 mil span DIP plug. |
| 3 | PA10MSO-OT-3 | 20 | 20 | Open Top | MSOP Programming adapter for 10-pin MSOP, 3.00 mm body, 0.50mm lead-pitch, wired 1-1. 300 mil span DIP plug. |
Not Finding What You Need?
Additional MSOP to DIP programming adapter configurations are available beyond the products listed above.
Custom configurations may include alternate pin counts, body widths, lead pitches, routing requirements, or DIP row spacing.
To request a configuration review, provide the MSOP package drawing, required routing details, and the target programming system interface.
