SSOP to DIP Programming Adapters
SSOP to DIP adapters allow SSOP packaged integrated circuits to be programmed using standard DIP-based programmers and development systems.
Overview
An SSOP to DIP adapter converts a Shrink Small Outline Package (SSOP) device to a dual in-line package (DIP) format for device programming and engineering evaluation.
SSOP packages are commonly used for microcontrollers, interface ICs, memory devices, and analog components where a compact surface-mount footprint is required. Because SSOP packages use fine-pitch gull-wing leads, they cannot be inserted directly into traditional DIP programmer sockets.
An SSOP to DIP programming adapter provides the mechanical interface and signal routing needed to allow SSOP devices to be programmed using DIP-based programmer hardware.
Adapt-Plus programming adapters are engineered for precise pin alignment, reliable electrical contact, and stable device positioning during repeated programming cycles.
Adapter Catalog
The following SSOP to DIP programming adapters are available for programming SSOP packaged devices using standard DIP programmers.
| Order | P/N | Top SSOP | Bottom DIP | Socket Type | Short Technical Description |
|---|---|---|---|---|---|
| 1 | PA16SS-OT-6 | 16 | 16 | Open Top | 16 pin SSOP with 5.3mm body & 7.8mm overall. Adapter wired 1-1. |
| 2 | PA20SS-OT-3 | 20 | 20 | Open Top | 20 pin SSOP with 5.3mm body & 7.8mm overall. Adapter wired 1-1. |
| 3 | PA20SS-OT-6 | 20 | 20 | Open Top | 20 pin SSOP with 5.3mm body & 7.8mm overall. Adapter wired 1-1. |
| 4 | PA24SS-OT-3 | 24 | 24 | Open Top | 24 pin SSOP with 5.3mm body & 7.8mm overall. Adapter wired 1-1. |
| 5 | PA24SS-OT-6 | 24 | 24 | Open Top | 24 pin SSOP with 5.3mm body & 7.8mm overall. Adapter wired 1-1. |
| 6 | PA28SS-OT-3 | 28 | 28 | Open Top | 28 pin SSOP with 5.3mm body width & 7.8mm overall. Adapter wired 1-1. |
| 7 | PA28SS-OT-6 | 28 | 28 | Open Top | 28 pin SSOP with 5.3mm body width & 7.8mm overall. Adapter wired 1-1. |
| 8 | PA30SS-4402-6 | 30 | 30 | Open Top | 6.1mm Body, 8.1mm Tip-Tip, 0.65 pitch wired 1-1 by pin number. |
| 9 | PA32SS-4402-6 | 32 | 32 | Open Top | 6.1mm Body, 8.1mm Tip-Tip, 0.65 pitch SSOP wired 1-1 by pin number. |
| 10 | PA16SS-OT-3 | 16 | 16 | Open Top | 16 pin SSOP with 5.3mm body & 7.8mm overall. Adapter wired 1-1. |
| 11 | PA20-28-1SS6 | 20 | 28 | Open Top | Scenix SX28H51-20SS in PIC16C55-DIP footrpint. |
| 12 | PA20SS-K3 | 20 | 16 | Open Top | Motorola 68HC05K3 in 20 pin SSOP package. |
| 13 | PA28SS-BP55 | 28 | 28 | Open Top | PIC16C55, 57 PLCC on BP Microsystems CP1128 programmer. |
| 14 | PA28SS-P55 | 28 | 28 | Open Top | Microchip PIC16C55, 57 SSOP. |
| 15 | PA5111-16SS-3 | 16 | 24 | Open Top | Atmel T87C5111 SSOP in 24 pin Atmel spec’d footprint. |
| 16 | PA5111-16SS-6 | 16 | 24 | Open Top | Atmel T87C5111 SSOP in 24 pin Atmel spec’d footprint. |
| 17 | PA5111-24SS-3 | 24 | 24 | Open Top | Atmel T87C5111 SSOP in 24 pin Atmel spec'd footprint. |
| 18 | PA754SS752 | 28 | 28 | Open Top | Philips 87C754 SSOP in 87C752 footprint. |
Not Finding What You Need?
Some SSOP devices require custom pin mapping, unique pin counts, or specialized programming socket configurations. If the adapter required for your device is not listed, Adapt-Plus can assist with custom programming adapter solutions.
Custom adapters are available for engineering development, device validation, and production programming environments.
