SOIC to SOIC Adapter Solutions

Overview

SOIC to SOIC emulation adapters provide an electrical interface between an SOIC device socket and an SOIC plug footprint used in emulator or fixture environments.

The top interface consists of an SOIC socket matched to the specified pin count for device insertion during emulation. The bottom interface presents an SOIC plug designed to mate with standard SOIC emulator or production sockets.

Selection is based on SOIC pin count and the corresponding SOIC plug configuration. Adapters may be wired 1:1 or with defined device-specific routing depending on part number.

Top Interface: SOIC socket (device under test)

Bottom Interface: SOIC plug footprint

Routing: 1:1 or device-specific mapping

Mechanical dimensions and electrical routing details are defined at the individual product level.

SOIC interface geometry conforms to standard SOIC footprint dimensions corresponding to the specified pin count and package width.

The plug interface is compatible with common production and emulator SOIC sockets used in laboratory and fixture environments.

Substrate material is rigid FR-4 with plated-through vias. Pad geometry and copper weight are controlled to maintain dimensional stability and signal integrity.

Overall height, insertion depth, and body dimensions vary by part number and are specified at the product level.

SOIC to SOIC adapters are available with defined routing schemes based on device and socket requirements.

Routing options may include 1:1 pin mapping between SOIC pins, device-specific remapping, and defined skips, tied pins, or required shorts where specified by the device.

Routing configuration is defined at the product level. Refer to the individual part page for exact signal mapping and electrical definition.